When something electrical stops working in your home, the question is rarely whether to fix it. It is who to call and how quickly they can get there. We handle the full range of residential electrical work in Jenison, from a single dead outlet to a complete panel replacement, and we are available every day from 5:00 AM to 9:30 PM. Small jobs get the same attention as large ones, because a circuit that looks minor can point to something that is not.
Jenison is a town built largely on residential neighborhoods, and the electrical work that comes out of it reflects that. Homeowners dealing with aging wiring, landlords keeping rental units in good condition, and small businesses needing circuits added or updated are the kinds of calls we handle. Call us and we will scope the job on the phone, give you a price before anything is scheduled, and get the work on the calendar. That is how it works whether you are calling about a tripping breaker or a full service upgrade.
You can reach us at (616) 226-9351.
Rental properties in Jenison create a specific set of logistics that owner-occupied homes do not. The person paying for the work is not always the person in the house, and the person in the house is not always available on short notice. We work around that regularly.
When a landlord books the visit, we coordinate access with whoever is on site. That might mean confirming a time directly with a tenant, or working within a window the property manager has already arranged. Either way, the scope and the price are confirmed with whoever is authorizing the work, before anything starts.
After the visit, we can walk through what was done and why, so a landlord has a clear record of what was found and what was repaired or replaced. That kind of documentation matters when a unit changes hands or when the same issue comes back later. You should not have to piece together what happened from memory. Call us and we'll walk you through the fix.
We service this area, and its neighborhoods each have their own wiring. The job types below come up regularly across Jenison, and each one starts the same way: a call, a clear description of the situation, and a price before anything is booked.
Replacing a fixture is straightforward when the wiring behind it is in good shape. When it is not, the fixture swap becomes a wiring repair first. We check the box, the circuit, and the connections before the new fixture goes up, so the work is done correctly rather than just completed. Recessed lighting, under-cabinet lighting, and dimmer-switch wiring all follow the same process.
A new appliance or a workshop tool that draws significant power needs its own circuit, sized to the load. Sharing a circuit with other devices leads to trips and, over time, to wiring that is working harder than it should. We run the dedicated circuit from the panel to the location, confirm the panel has capacity to support it, and install the correct outlet for the equipment. For a hot tub, that also means a disconnect and GFCI protection at the right distance from the water.
Outdoor wiring has to be run in weatherproof conduit or rated cable, with weatherproof boxes at every fixture and outlet location. Security lighting, motion sensor lights, and landscape circuits all require that the wiring meets code for exterior applications. We handle the full run from panel to fixture, including any trenching or conduit work the installation calls for.
A whole-home surge protector installs at the main panel and shields every circuit in the building from voltage spikes that come in through the service entrance. It is a single-visit installation, and it covers equipment that a plug-in strip cannot reach. Grounding and bonding are part of that conversation, and we cover both during the installation.
A 240-volt circuit for a range, wall oven, or dryer has to be run directly from the panel to the appliance location, sized correctly for the load. These are not circuits that share capacity with other devices. If the panel does not have an open slot or enough capacity to add one, that is part of the assessment before the circuit is pulled.
When a panel cannot carry what a home actually draws, the answer is a service upgrade. We perform the load calculation, determine what amperage the home needs, and handle the panel replacement and service-entrance work. In Ottawa County, an upgrade of this kind typically involves coordination with the utility for the disconnect and reconnection, and we walk through that process with you before the job is scheduled.
Not every electrical problem in a home originates inside it. Some faults sit at the meter, at the service entrance, or on the utility's side of the connection entirely. Knowing which side of that line a problem is on determines who fixes it and what the next step is.
We check the service entrance, the meter base, and the main disconnect as part of a diagnostic when the symptoms point that direction. If the fault is upstream of the panel, we tell you clearly, explain what we found, and describe what the utility's process looks like from there. You are not left to figure that out on your own.
If the fault is on our side, the diagnostic moves into the panel and the branch circuits. Arc-fault and ground-fault breakers, grounding and bonding, and the condition of the service entrance wiring are all part of what we check when the problem is not immediately obvious from a single circuit. Reach out and we'll start at the panel.
Houses in Jenison span a wide range of ages, and the wiring inside them reflects that range. Homes built in earlier decades were wired to standards that were appropriate then but that do not match what a modern household puts on a system. That does not always mean the wiring is dangerous. It does mean it has to be assessed honestly.
Knob-and-tube wiring, where it is still in service, was designed for lower loads and does not include a ground conductor. It is not automatically a hazard, but it cannot be extended, and it is not compatible with modern protection devices. Where it is still active, replacement is the right answer. Where it has already been abandoned in place and newer wiring runs beside it, the older material can often be left alone.
Aluminum branch wiring, which turns up in homes of a certain era, is a different situation. The connections are the concern, not the wire itself. Aluminum expands and contracts more than copper, which loosens connections over time and creates a fire risk at outlets, switches, and fixtures. Aluminum-wiring remediation addresses the connection points throughout the house, and it is a job we handle regularly in this area.
Arc-fault circuit interrupter breakers and ground-fault circuit interrupter protection are now required in areas of a home where older panels and wiring typically have neither. Adding AFCI protection to a bedroom circuit or GFCI protection to a kitchen or bathroom outlet is code-compliant wiring work that improves safety without requiring a full rewire. We assess what is in place and what is missing, and we tell you what the upgrade involves before any work starts.
The price for electrical work depends on what the job actually involves, and that is not always clear until the diagnostic is done. What the fault turns out to be, what has to be opened up to reach it, and whether the existing circuit or panel can carry the change are the things that move a quote in one direction or another.
When you call, we talk through the situation and give you a price based on what you describe. That price is confirmed before anything is scheduled. If the scope changes once we are on site because the wiring condition is different from what was described, we tell you before we proceed. You are not handed a different number at the end without a conversation first. The price is straightforward to explain, and any question about what it covers gets a straight answer.
Call (616) 226-9351 to get a quote on any job.
We know schedules shift, so we keep booking flexible. If a problem cannot wait, we take the call and work out what the schedule allows. If a tenant has to be home for access, we coordinate the window with them directly. If a business has to stay open during the work, we plan the visit around which circuits can be isolated without disrupting operations.
What you get when you call is a real conversation about the job, not a form to fill out. We confirm the scope, give you the price, and schedule the visit around what works.
For jobs that are genuinely urgent, call (616) 226-9351 during our hours of 5:00 AM to 9:30 PM and we will talk through what is happening and what can be arranged.
We cover Jenison and the surrounding Ottawa County area, including Georgetown Township, Hudsonville, Grandville, Tallmadge Township, and Wyoming. If you are in any of these communities and need an electrician, the process is the same: call, describe the situation, get a price, and schedule the visit. Coverage across the area means the same work is available wherever you are in the region. If you would rather read than call, the services page covering electrical work has the detail.
A small office build-out typically requires adding circuits for workstations and equipment, installing additional outlets at desk and equipment locations, running dedicated circuits for any high-draw equipment, and sometimes upgrading the panel if the existing service cannot carry the added load. We scope the work based on the layout and the equipment list, and we give you a price before anything is confirmed.
Yes, in most cases. We plan longer jobs in stages so that the circuits serving the most essential loads are the last to go off and the first to come back on. The specifics depend on what the job involves, but keeping the property livable during the work is a factor we account for in how the work is sequenced.
Permit requirements for electrical work vary depending on the scope of the job and whether the property is inside a municipality or in the unincorporated county. A panel replacement or service upgrade typically involves a permit and an inspection by the authority having jurisdiction. We confirm what applies at your address before the work is scheduled.
Everything from the meter base into the home, including the panel, the branch circuits, and all outlets and fixtures, falls on the property owner's side. The utility is responsible for the service drop and the meter itself. When a fault sits at the boundary, we identify which side it is on during the diagnostic and explain clearly what the next step is, whether that means we handle it or you need to contact the utility.
Yes. We schedule around the tenant's situation and coordinate access through the property owner or manager. For work that requires the power to be off, we give advance notice so the tenant can plan around the outage. The goal is to complete the work with as little disruption as possible to whoever is living in the unit.
Electrical problems that seem minor have a way of staying minor right up until they do not. A breaker that trips occasionally, an outlet that stopped working for no clear reason, a panel that is older than anyone can remember, these are not problems that improve on their own.
Call Kentwood Electrical Company at (616) 226-9351, available every day from 5:00 AM to 9:30 PM.
Book the visit. Know the scope. Know the price before it starts.
We are also in: Georgetown Township, Hudsonville, Grandville, Tallmadge Township, Wyoming. For every town we reach, see our full area list.
Below is a plain-language look at the electrical work we handle in Jenison and the surrounding Ottawa County area. Each row covers what the service includes, who it fits best, and one practical thing worth knowing before you call. If a job does not fit neatly into one of these categories, call us and we will talk through what you are dealing with.
| Electrical Service | Scope of Work | Ideal For | Good to Know |
|---|---|---|---|
| Electrical Panel & Service Upgrades | 100-amp to 200-amp upgrades, Full panel replacement, Load calculation and service-entrance work, Subpanel installation | Older homes adding EV chargers, electric appliances, or heating equipment circuits | A load calculation is always the starting point. The right panel size follows from what the home actually draws, not a default assumption. |
| Ceiling Fan Installation | New wiring to locations without a ceiling box, Existing fixture replacement, Switch and remote wiring, Box and brace installation | Rooms without a ceiling box or homes replacing old fixtures | A ceiling fan needs a rated box and brace, not just a standard light fixture box. We confirm the right setup before the fan goes up. |
| Whole-Home Surge Protection | Panel-mounted surge device installation, Protection for every circuit in the building, Single-visit completion, Appliance and electronics coverage | Homes with sensitive electronics or properties in areas with frequent voltage fluctuations | Surge protection installed at the panel covers every circuit in the building, not just the outlets where a plug-in strip is connected. |
Call (616) 226-9351 to talk through your electrical situation and get a price before anything is booked.
(616) 226-9351